1 watts symmetric LED Lens , Led Optical Lens for Street Light
Fixture
Quick Details:
1. Dimension: 16.4x11.03mm
2. Beam Angle: 80x135 degree
3. Match Led: SMD 3535, Cree XPE XTE
4. Materials : Optical Grade PMMA
5. Accessories: Led lens, PCB soldering Led
6. Efficiency: >91%
Specifications:
| Model No. | SOE-SL1W-80x135 |
| Beam angle | 80x135degree |
| Holder Size | / |
| Lens size | 16.4x11.03mm |
| Led chips | SMD3535, Cree XTE XPE leds |
| Temp | -35 to + 90 degree |
| Standards | SGS/ROHS |
| Product name | Led Peanut Lens |
| Transmittance | 93% |
| Accessory | / |
| Lens surface | Clear, Frosted |
| Application | Wall-washer light,Ceiling light ,Spot Light |
Led optical Lens Drawing:
Features :
Product combined with Geometric Surface Design,High light
efficiency
Storage: Do not store in dusty place, or expose under corrosive
environment
Contact: Do not touch the lens surface with bare-hand. Please use
gloves to touch the lenses.
Cleaning: Clean lenses only if necessary. Use only mild soap,
water and soft cloth.Do not use any commercial cleaning solvents.
Led lens distribution:
NOTE: The typical divergence will be changed by different color,
chip size and chip position tolerance. The typical total divergence
is the full angle measured where the luminous intensity is half of
the peak value.
Our team
Over 3 teams form our design department, with rich experience in
the areas of optics, thermodynamics, industrial design, electrical
engineering, information engineering, the arts, ect.
Strategic alliances with an extensive support base of experienced
domestic and offshore mold makers ensure our customer’s objectives
for quality, delivery, and value are met. Our engineers match
strategic mold making partners to your requirements, conduct mold
design reviews, perform mold flows as necessary, provide detailed
delivery information, and ensure all your specifications are
achieved.
Material: PMMA
PMMA is a strong and lightweight material.
PMMA transmits up to 92% of visible light (3 mm thickness), and
gives a reflection of about 4% from each of its surfaces due to its
refractive index (1.4905 at 589.3 nm). It filters ultraviolet (UV)
light at wavelengths below about 300 nm (similar to ordinary window
glass).
Poly(methyl methacrylate) (PMMA), also known as acrylic or acrylic
glass as well as by the trade names Plexiglas, Acrylite, Lucite,
and Perspex among several others.
PMMA is an economical alternative to polycarbonate (PC) when
extreme strength is not necessary. Additionally, PMMA does not
contain the potentially harmful bisphenol-A subunits found in
polycarbonate. It is often preferred because of its moderate
properties, easy handling and processing, and low cost.
